Avalon RF RT423 Manual de usuario descargar pdf (Pagina 7)

AVALON RF, INC. Page 5 of 15

ODX402/ ODX502/ OODX602 User’s Guide & Operating Manual

2.3 Antenna Inputs, total of 2 (Circle 1 on front panel).

The standard ODX602 has 2 SMA (f) inputs on the front panel. The –

R option installs the antenna options on the rear panel. This is most

convenient in rack mount or OEM installations. The input impedance

is 50 ohms.

2.4 Video Outputs (Circle 4 on rear panel)

The ODX602 has 2 video outputs – Video 1 and Video 2. Dual video

outputs enable one to be used for monitoring while the other can be

used for recording. Video output connector is a BNC type with a 75 Ω

(ohm) impedance.

a) Output is NTSC/PAL/RS170A/CCIR baseband from 20 Hz to 5.5

MHz for NTSC or 20 Hz – 6.5 MHz for PAL.

a) Output amplitude is 1 Vp.p. with negative sync tips of 0.3 Vp.p.

2.5 Audio Outputs (Circle 2 on rear panel)

Audio output is through a 5 pin connector located on the rear panel.

Both stereo outputs are 600 balanced. The amplitude (volume) can

ba adjusted through the RS232 terminal.

Pin 1 – Audio Return

Pin 2 – Left Audio + Output

Pin 3 – Right Audio + Output

Pin 4 – Right Audio - Output

Pin 5 – Left Audio - Output

Figure D – Audio Output(s)

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Sin comentarios

Avalon RF RT423 Manual de usuario Pagina 7