Avalon RF RT423 Manual de usuario descargar pdf (Pagina 6)

AVALON RF, INC. Page 4 of 15

ODX402/ ODX502/ OODX602 User’s Guide & Operating Manual

2. Specifications

2.1 Frequency Range (Model Dependent).

The frequency range of each model has a base number that identifies

its band. E.g 4 is UHF, 5 is L-band & so on. The ‘standard’ frequency

ranges for the various models are as follows:

ODX402: UHF receiver with a tuning range of 170-230 MHz or

470MHz-862MHz.

ODX502: L-band receiver with a tuning range of 900 MHz-1200 MHz

or 1.2GHz-1.8GHz.

ODX602: S-band receiver with a tuning range of 2.1GHz-2.5GHz or

2.3 –2.7 GHz.

There can be 16 channels within the operating range. For frequency

ranges other than those indicated, please contact Avalon RF sales.

2.2 Power Input – (Circle 3 on rear panel).

a) The power input connector is a 4 pin on the rear panel of the

ODX602.

Pin 1 – Power Return

Pin 2 – NC

Pin 3 – NC

Pin 4 – Power Input (+9Vdc to +20Vdc)

Figure C – Power Input

b) The ODX602 operates off a 9Vdc to 20Vdc unregulated voltage

source with a ripple of less than 0.5Vp.p.

c) Input Current is <0.6 Amps at an input voltage of 12Vdc.

d) Power is switched ON/OFF via a front panel electronic switch.

e) The ODX602 power input is protected against reverse polarity and

also has a under voltage lock-out.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Sin comentarios

Avalon RF RT423 Manual de usuario Pagina 6